heat treat receiver ak47

6 posts - 4 authors - Last post: 17 Dec 2008Is this correct? Heat treating and parkerizing the receiver seems a bit. Good luck to ya, Happy AK Building, Steve. 22zsteve is offline

If you heat treat the whole receiver , the minute you quench it you will warp the entire thing.) Ohio Ordnance Works Manufactures Universal AKM 7.62mm & AKS

more on akm receiver heat treat -. The main problem is I don't know the steel type for the SKS products receiver (no email reply)- if it is 4130 like Marsh

The trunion is heat treated and can take a lot of heat without losing its The critical part of the final product, a bent AK receiver with the lips of

25 posts - 11 authors - Last post: 13 Dec 2008There are two steps to heat treating metal for an AK receiver . The first is to harden it by taking it up to 1500 degrees F and then

21 posts - 14 authors - Last post: 14 MayMilled receiver AK-47's are getting harder to come across at a decent price. .... The heat treatment process is prioritary gun standard.

19 posts - 11 authors - Last post: 21 Apr 2009[Archive] AK receiver heat treatment question Gunsmithing & How To.

3 May 2010 80% Receiver Blanks and Parts and more!! x and y axis stamping due to their thickness and only need heat treating at the ejector spur.

AK47 Bulgarian Style Milled Receiver - The receivers are made from 4140 steel, These receiver are straight out of the heat treat with no finish or

13 posts - 6 authors - Last post: 13 Aug 2008IIRC, B-West did assemble some AK's on U.S. made receivers after the .... The issue here appears to be failure to heat treat , and you have

I have a Cold Steel Solutions AK-47 receiver blank, pictured below. Besure that you heat treat the ejector before you weld the rails on.

3 posts - 2 authors - Last post: 29 Nov 2005B-West AK-47 US receiver . What is the best way to fix this gun. If it just needs heat treating you may look the build tutorial posted in

6 posts - 2 authors - Last post: 12 Oct 2005Following is the procedure that is the most generally accepted method to heat treating an AKM receiver . Remember when doing this to use

2 posts - 2 authorshello,,i've read many post also on the heat treat issues with home built ak's and it would be very hard to tell if it was properly done or not unless you

AK-47 .org 80% AK-47 receiver kits. No FFL required to purchase. heat treat to harden the ejector for you prior to shipment upon request.